When Purity and Quality Matter, and The Best Drinking Water is Your Priority...

Water Fixers has been designing, manufacturing, servicing, repairing, and installing Reverse Osmosis water purification systems since 1987. We manufacture them in our warehouse located right here on the Central Coast. We serve both the residential and commercial markets, offering custom design and build services for any pure water application. The EPS series of Reverse Osmosis systems is our “Elite” all-USA-manufactured system, featuring the structural integrity, longevity, and legacy of American-made quality components. We include the best quality USA-made filter cartridges to complement the status of the Elite quality and purity. We have installed and serviced thousands of systems over the past 38 years, and the EPS-3T is one of our finest, highest-quality, performance-valued residential systems with three dedicated stages of filtration. No one else has the wisdom or can compete with our quality, performance, and variety.

woman-drinking-pure-water-fixers-water 400 px h png

The EPS-3T "Elite Ultimate" Reverse Osmosis Drinking Water System is the Best Choice

EPS 3T reverse osmosis drinking water system complete unit
EPS-3T Reverse Osmosis System

EPS-3T Features and Benefits

The EPS-3T is assembled here in our warehouse at Water Fixers. This 3-filter cartridge system uses all USA-manufactured components and USA-manufactured filter cartridges. We designed this system for individuals and companies that desire uncompromising, ultimate water quality, purity, and safety results. Superior construction, quality, and longevity when compared to the CPS-3T and SPS-3T. 3/8″ tubing to the storage tank and dispensing faucet for higher flow delivery when dispensing water. Higher water pressure rating than the CPS-3T and SPS-3T. It also includes a 4-gallon storage tank and a luxurious air-gap dispensing faucet. No one offers the quality of filters that we include.

call-now-red-blue button 100 px h
For Pricing
Water Fixers delivery truck icon
Quick Shipping
water-fixers-coupons-logo 100 px h
Save Money
Watts reverse osmosis drinking water system under kitchen sink
Trade-in Program

Beware when purchasing cheap water filter cartridges from Big Box Stores, on the Internet, and Water Treatment dealers, as they are inferior quality, and 95% of them are manufactured in China!

Buyer beware warning label

Cheap filters do not have the micron size or special filter material required to remove VOCs (volatile organic chemicals), Hydrocarbon Gases (chlorine, ammonia, chloramines), Cysts (cryptosporidium, cyclospora, giardia), Silt, Clay, and other toxic contaminants, when compared to USA-manufactured cartridges. Purchasing “Cheap Filters” to save a few dollars, or because it’s convenient, or convincing yourself that any cheap water filter will provide the same quality of pure water as a USA-manufactured filter can, are not acceptable excuses to compromise the integrity and safety of your drinking water. The quality of water Filter Cartridges installed inside any Reverse Osmosis Drinking Water System are critical in determining the purity, safety, and quantity of water delivered. With cheap Chinese-manufactured filters, you need to consider product safety and quality control when compared with American manufacturing standards and regulatory agencies. Water Fixers is THE ONLY COMPANY that incorporates the highest quality of American-made filter cartridges as “Standard Equipment” in our SPS, EPS, and UPS Reverse Osmosis Drinking Water Systems. If you care about protecting your health as much as we do, you’ll choose Water Fixers for all your water filter cartridge purchases. 

EPS-3T 3 Stages of Filtration - Our Filters Make The Pure Difference

1 micron duplex water filter with graphics explaining filtration features

Stage 1 Pre-filter: 1 micron "Dual-Purpose" Duplex Filter

Benefits: VOCs, Pesticides, Herbicides, Insecticides, Hydrocarbon Gases, Chlorine, Cysts, Silt, Clay

2.5″ x 10″ Patented two filter cartridges in one cartridge technology. Featuring a high-density, coconut shell, powdered carbon impregnated pleated-fiber filter cartridge. Molded and pleated micro-fiber material with a nominal 1 micron particle filtration rating with each fiber impregnated with coconut shell powdered carbon to remove silt, clay, sediments, sand, rocks, cysts (giardia, cyclospora, cryptosporidium, e-coli), and adsorb hydro-carbon gases (chlorine, ammonia, chloramines), VOC’s (toluene, benzene, xylene, MTBE, perchlorate), and other contaminants. The primary function is to provide two stages of filtration in one single cartridge to prevent sediments, gases, and chemicals from fouling or damaging the membrane filter. USA-assembled. NOTE: Coconut Shell Carbon has twice as many cell sites, adsorbs twice as fast, and retains twice as many gases and VOC’s as Bituminous Carbon; therefore, it is clearly superior in performance! Service Interval: Recommended every 12 months

0.01 micron TFC membrane water filter with graphics explaining filtration features

Stage 2 Membrane Filter: TFC Membrane Filter

TFC (thin film composite) Non-chlorinated water membrane filter cartridge. Particulate Filtration rating at .001 micron. Removes Total Dissolved Solids (TDS), Salts, Metals, Minerals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts and Bacteria, and other contaminants from an untreated water supply. Cannot be used with a chlorinated water source. Average rejection ratio: > 98%. Rated production up to 24 gpd. USA-manufactured. Service Interval: Every 36 months recommended.

5 micron carbon block water filter with graphics explaining filtration features

Stage 3 Post-filter: 1/2 micron Solid Carbon Block Filter

Benefits: VOCs, Pesticides, Herbicides, Insecticides, Hydrocarbon Gases, Chlorine, Cysts, Silt, Clay

2.5″ x 10″ solid pressed coconut shell carbon block filter cartridge. Featuring a high-density, high-volume, coconut shell, powdered carbon briquette, with a nominal 1/2 micron particle filtration rating to remove cysts (giardia, cyclospora, cryptosporidium, e-coli), and adsorb hydro-carbon gases (chlorine, ammonia, chloramines), and VOC’s (toluene, benzene, xylene, MTBE, perchlorate), and other contaminants. The primary function is to provide the safest, healthiest, purest water possible by removing Chlorine, Chloramines, Hydrocarbon Gases, VOC’s, and Cysts when dispensing water to the faucet. USA-manufactured. NOTE: Coconut Shell Carbon has twice as many cell sites, adsorbs twice as fast, and retains twice as many gases and VOC’s as Bituminous Carbon; therefore, it is clearly superior in performance! Service Interval: Recommended every 12 months.

OPTIONAL FILTERS

1:1 TFC membrane water filter with graphics explaining filtration features

OPTIONAL: Stage 2 Membrane Upgrade Filter: 1-1 TFC Membrane Ratio

1-1 “Patented” Reverse Osmosis Membrane Filter technology that uses only 1 gallon of drain water to produce 1 gallon of pure drinking water. After years of research and development, this new water-saving membrane is now affordable and available to upgrade and replace your old technology membrane. Our Pure Safe Water Products Reverse Osmosis systems employ 3-1 ratio membranes and standard equipment, but we now offer the 1-1 ratio membrane as an affordable option. If you are looking for the ultimate water savings, then you just found the solution. This membrane still employs the TFC (thin film composite), Non-chlorinated water membrane filter cartridge. Particulate Filtration rating is at .001 micron. It removes Total Dissolved Solids (TDS), Salts, Metals, Minerals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts and Bacteria, and other contaminants from an untreated water supply. It cannot, however, be used with a chlorinated water source. Average rejection ratio: > 98%. Rated production up to 50 gpd. USA-manufactured. Service Interval: Recommended every 24-36 months

Alkaline water filter with graphics explaining filtration and mineral features

OPTIONAL: Stage 4 Post-filter Upgrade: Alkali Filter

An Alkali Post-filter is available to add on to any new reverse osmosis drinking water filter system, or to retrofit any pre-existing reverse osmosis system. The Alkali filter cartridge contains calcium and magnesium carbonates, essentially hard water minerals that are dissolved into the water stream when dispensing water from the storage tank to the faucet. Adding the hard water minerals back into the water can raise the PH level of the purified water if that is a concern for the individual. Sometimes, when the osmosis membrane filter removes most or all of the dissolved minerals diluted in the tap water, the PH level drops. To raise the PH level back up, you would install an Alkali filter cartridge. The internal filter media is sacrificial and must be replaced periodically. The frequency of the filter change interval will depend on water usage and water quality.

ACCESSORIES

PAE 3 gallon white steel storage tank for reverse osmosis systems

4-gallon Steel Pressure Storage Tank

4-gallon Steel Pressure Storage Tank with a usable pure water draw down of approximately 1.75-2 gallons of purified water when completely drained. Steel construction with a powder coat finish. Internal heavy-duty butyl/EPDM diaphragm or bladder, made from thick butyl rubber that meets FDA requirements for potable water, offering excellent air retention and flexibility for consistent pressureusable pure water draw down. 1/4″ MPT connection. Dimensions: 14″ H x 10″ D. 100 psi max working pressure. USA-manufactured.

QMP 2011 chrome drinking water faucet for reverse osmosis systems

Ceramic Disc Long-reach Air-gap Dispensing Faucet

This unique, elegant, attractive, heavy-duty, long-reach Air-gap faucet enhances the décor of any kitchen. It features a 1/4 turn, ceramic disc, single lever operation which mimics and complements most kitchen faucets. The flow rate is superior to that of other conventional reverse osmosis faucets when dispensing water from the reverse osmosis storage tank. It is machined from solid lead-free brass with a more durable, longer-lasting rhodium chrome finish. It is molded, machined, and hand assembled in Los Angeles, California. The inlet water connection is 3/8″ for an enhanced water dispensing flow rate. It has a separate Air-gap module base with 1/4″ and 3/8″ brass barb connections at the base to comply with UPC plumbing code drain installation. Mounts in a standard 1 1/8″-1 1/4″ hole on the kitchen sink or countertop. USA-manufactured.

EPS and UPS reverse osmosis installation kits with tubing, fittings, and shutoff components

EPS-3T Standard Installation Kit

The EPS-3T Installation Kit Includes:
1. 10′ ft. White 3/8″ Poly Tubing, 10′ ft. White 1/4″ Poly Tubing, 4′ ft. Black 3/8″ Poly Tubing, 5′ ft. Black 1/4″ Poly Tubing
2. 3/8″ x 1.5″ Drain Saddle Clamp
3. 3/8″ Angle Stop Adapter with integrated 1/4″ Shut-off Valve
4. 3/8″ Poly Storage Tank Shutoff Valve 1/4 turn
5. 7/16″ x 3/8″ Poly Faucet Adapter

SPECIFICATIONS

  • SPECIFICATIONS EPS-3T
  • Dimensions Filter Manifold: 14″ H x 8″ D
  • Dimensions Storage Tank: 14″ H x 10″ D
  • Filter Assembly: USA – Aluminum Bracket, Plastic Housings, Nylon Fittings
  • Storage Tank: USA – Metal
  • Faucet: USA – Lead Free Brass, Ceramic Disc 1/4-turn
  • Inlet Water Connection: 3/8″ Angle Stop Adapter with 1/4 Turn Ball Valve
  • Component Connections: 1/4″ and 3/8″ Nylon Fast & Tight
  • Storage Tank Connection: 3/8″ Poly 1/4 Turn Ball Valve
  • Faucet Connection: 3/8″ Tubing
  • Storage Tank Capacity: 1.75-2.0 gallons
  • Tank Full Shut-off: 1/4″ Automatic Diaphragm Shut-off Valve
  • Membrane Check Valve: Two Valves: Stainless Steel Inline (membrane), Poly Inline (shut-off valve)
  • Membrane Drain Flow Restrictor: 1/4″ PVC Molded Inline With Pre-filter Screen 150 ml
  • Membrane Daily Production: Up To 24 gpd
  • Average TDS rejection ratio: > 98%
  • Permeate to Concentrate Water Ratio: 3:1
  • Maximum Working Pressure: 90 psi Static
  • Maximum Water Temperature: 90 F
  • Warranty: 24 months Parts, 12 months Labor
  • Filter Change Service Interval: Recommended every 12 months

ALTERNATIVE REVERSE OSMOSIS SYSTEMS

Beware of False Promises, Overused Cliches, and Huge Disappointments From Novices

Buyer beware warning label

DO NOT BE DECEIVED BY PLUMBERS, BIG BOX STORES, HANDYMEN, or PLUMBING COMPANIES THAT CLAIM TO KNOW ABOUT WATER FILTRATION, PURIFICATION, or WATER SOFTENING. They don’t understand what they are selling or trying to service! They are uneducated and DO NOT POSSESS a C55 WATER TREATMENT LICENSE, therefore have no right to judge, comment, or recommend any water filtration product for you or your business! You need a licensed, experienced, and qualified expert like Water Fixers to help you make a logical choice for the best water filtration system to fulfill your pure water expectations. Call 805-928-6444 or send an email to information@waterfixers.com to receive immediate assistance from experienced pros that have serviced and installed thousands of systems.

Stop Living With Contaminated Water and Call Your Water Fixers Experts For The Remedy

For over 38 years, Water Fixers Plumbing & Filtration has helped thousands of Central Coast Residents remove the most difficult chemicals from their water supply. Our Specialty Filtration Systems are custom-designed and custom-built to handle any water quality you encounter. We are the only locally owned Well Water and City Water Experts. We specialize in Soft Water, Purified Water, Distilled Water, Ozone Systems, Ultra-Violet Light Systems, Problem Water Systems, and more.