Water Fixers has been designing, manufacturing, servicing, repairing, and installing Reverse Osmosis water purification systems since 1987. We manufacture them in our warehouse located right here on the Central Coast. We serve both the residential and commercial markets, offering custom design and build services for any pure water application. The SPS series of Reverse Osmosis systems combines the best quality USA-made filter cartridges with offshore components to satisfy the budget-conscious individual or company without sacrificing the purity and safety of the water produced. We have installed and serviced thousands of systems over the past 38 years, and the SPS-3T is one of our affordable, performance-valued residential systems with three dedicated stages of filtration. No one else has the wisdom or can compete with our quality, performance, and variety.
The SPS-3T is assembled here in our warehouse at Water Fixers. This 3-filter cartridge system is a hybrid design that uses all Chinese-manufactured components and USA-manufactured filter cartridges. We designed this system to be price-competitive, but not at the cost of sacrificing water quality, purity, and safety. The filters included are a USA-manufactured Dual-purpose Sediment and Chlorine removal Pre-filter, a USA-manufactured TFC Membrane Filter, and a USA-manufactured Post Carbon Block Filter. It also consists of a 3.5-gallon storage tank and an air-gap dispensing faucet. No one offers the quality of filters that we include.
Cheap filters do not have the micron size or special filter material required to remove VOCs (volatile organic chemicals), Hydrocarbon Gases (chlorine, ammonia, chloramines), Cysts (cryptosporidium, cyclospora, giardia), Silt, Clay, and other toxic contaminants, when compared to USA-manufactured cartridges. Purchasing “Cheap Filters” to save a few dollars, or because it’s convenient, or convincing yourself that any cheap water filter will provide the same quality of pure water as a USA-manufactured filter can, are not acceptable excuses to compromise the integrity and safety of your drinking water. The quality of water Filter Cartridges installed inside any Reverse Osmosis Drinking Water System are critical in determining the purity, safety, and quantity of water delivered. With cheap Chinese-manufactured filters, you need to consider product safety and quality control when compared with American manufacturing standards and regulatory agencies. Water Fixers is THE ONLY COMPANY that incorporates the highest quality of American-made filter cartridges as “Standard Equipment” in our SPS, EPS, and UPS Reverse Osmosis Drinking Water Systems. If you care about protecting your health as much as we do, you’ll choose Water Fixers for all your water filter cartridge purchases.
Benefits: VOCs, Pesticides, Herbicides, Insecticides, Hydrocarbon Gases, Chlorine, Cysts, Silt, Clay
2.5″ x 10″ Patented two filter cartridges in one cartridge technology. Featuring a high-density, coconut shell, powdered carbon impregnated pleated-fiber filter cartridge. Molded and pleated micro-fiber material with a nominal 1 micron particle filtration rating with each fiber impregnated with coconut shell powdered carbon to remove silt, clay, sediments, sand, rocks, cysts (giardia, cyclospora, cryptosporidium, e-coli), and adsorb hydro-carbon gases (chlorine, ammonia, chloramines), VOC’s (toluene, benzene, xylene, MTBE, perchlorate), and other contaminants. The primary function is to provide two stages of filtration in one single cartridge to prevent sediments, gases, and chemicals from fouling or damaging the membrane filter. USA-assembled. NOTE: Coconut Shell Carbon has twice as many cell sites, adsorbs twice as fast, and retains twice as many gases and VOC’s as Bituminous Carbon; therefore, it is clearly superior in performance! Service Interval: Recommended every 12 months
TFC (thin film composite) Non-chlorinated water membrane filter cartridge. Particulate Filtration rating at .001 micron. Removes Total Dissolved Solids (TDS), Salts, Metals, Minerals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts and Bacteria, and other contaminants from an untreated water supply. Cannot be used with a chlorinated water source. Average rejection ratio: > 98%. Rated production up to 24 gpd. USA-manufactured. Service Interval: Every 36 months recommended.
Benefits: VOCs, Pesticides, Herbicides, Insecticides, Hydrocarbon Gases, Chlorine, Cysts, Silt, Clay
2.5″ x 10″ solid pressed coconut shell carbon block filter cartridge. Featuring a high-density, high-volume, coconut shell, powdered carbon briquette, with a nominal 1/2 micron particle filtration rating to remove cysts (giardia, cyclospora, cryptosporidium, e-coli), and adsorb hydro-carbon gases (chlorine, ammonia, chloramines), and VOC’s (toluene, benzene, xylene, MTBE, perchlorate), and other contaminants. The primary function is to provide the safest, healthiest, purest water possible by removing Chlorine, Chloramines, Hydrocarbon Gases, VOC’s, and Cysts when dispensing water to the faucet. USA-manufactured. NOTE: Coconut Shell Carbon has twice as many cell sites, adsorbs twice as fast, and retains twice as many gases and VOC’s as Bituminous Carbon; therefore, it is clearly superior in performance! Service Interval: Recommended every 12 months.
1-1 “Patented” Reverse Osmosis Membrane Filter technology that uses only 1 gallon of drain water to produce 1 gallon of pure drinking water. After years of research and development, this new water-saving membrane is now affordable and available to upgrade and replace your old technology membrane. Our Pure Safe Water Products Reverse Osmosis systems employ 3-1 ratio membranes and standard equipment, but we now offer the 1-1 ratio membrane as an affordable option. If you are looking for the ultimate water savings, then you just found the solution. This membrane still employs the TFC (thin film composite), Non-chlorinated water membrane filter cartridge. Particulate Filtration rating is at .001 micron. It removes Total Dissolved Solids (TDS), Salts, Metals, Minerals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts and Bacteria, and other contaminants from an untreated water supply. It cannot, however, be used with a chlorinated water source. Average rejection ratio: > 98%. Rated production up to 50 gpd. USA-manufactured. Service Interval: Recommended every 24-36 months
An Alkali Post-filter is available to add on to any new reverse osmosis drinking water filter system, or to retrofit any pre-existing reverse osmosis system. The Alkali filter cartridge contains calcium and magnesium carbonates, essentially hard water minerals that are dissolved into the water stream when dispensing water from the storage tank to the faucet. Adding the hard water minerals back into the water can raise the PH level of the purified water if that is a concern for the individual. Sometimes, when the osmosis membrane filter removes most or all of the dissolved minerals diluted in the tap water, the PH level drops. To raise the PH level back up, you would install an Alkali filter cartridge. The internal filter media is sacrificial and must be replaced periodically. The frequency of the filter change interval will depend on water usage and water quality.
3.5-gallon Plastic Pressure Storage Tank with a usable pure water draw down of approximately 1.5-1.75 gallons of purified water when completely drained. Internal butyl rubber bladder for the pure water storage. 1/4″ MPT connection. Dimensions: 15″ H x 10″ D. 100 psi max working pressure. Chinese-manufactured.
The Long-reach Air-gap faucet is typically used for dispensing pure water from a pressurized storage tank of a reverse osmosis system. Manufactured from Lead-free brass with a high-polish chrome-plated finish. Touch n flow spring-loaded handle for easy dispensing and automatic shut-off after dispensing. 1/4″ inlet water connection. Integrated Air-gap module with 1/4″ and 3/8″ brass barb connections at the base of the faucet to comply with UPC plumbing code drain installation. Mounts in a standard 1 1/8″-1 1/4″ hole on the kitchen sink or countertop. Chinese-manufactured.
The SPS-3T Installation Kit Includes:
1. 10′ ft. White 3/8″ Poly Tubing, 10′ ft. White 1/4″ Poly Tubing, 4′ ft. Black 3/8″ Poly Tubing, 5′ ft. Black 1/4″ Poly Tubing
2. 3/8″ x 1.5″ Drain Saddle Clamp
3. 3/8″ Angle Stop Adapter with integrated 1/4″ Shut-off Valve
4. 1/4″ Poly Storage Tank Shutoff Valve 1/4 turn
DO NOT BE DECEIVED BY PLUMBERS, BIG BOX STORES, HANDYMEN, or PLUMBING COMPANIES THAT CLAIM TO KNOW ABOUT WATER FILTRATION, PURIFICATION, or WATER SOFTENING. They don’t understand what they are selling or trying to service! They are uneducated and DO NOT POSSESS a C55 WATER TREATMENT LICENSE, therefore have no right to judge, comment, or recommend any water filtration product for you or your business! You need a licensed, experienced, and qualified expert like Water Fixers to help you make a logical choice for the best water filtration system to fulfill your pure water expectations. Call 805-928-6444 or send an email to information@waterfixers.com to receive immediate assistance from experienced pros that have serviced and installed thousands of systems.
For over 38 years, Water Fixers Plumbing & Filtration has helped thousands of Central Coast Residents remove the most difficult chemicals from their water supply. Our Specialty Filtration Systems are custom-designed and custom-built to handle any water quality you encounter. We are the only locally owned Well Water and City Water Experts. We specialize in Soft Water, Purified Water, Distilled Water, Ozone Systems, Ultra-Violet Light Systems, Problem Water Systems, and more.
