COMPACT • ENTRY-LEVEL • ALL-IN-ONE

SoftFlo C Water Softener

Compact footprint. Measured-demand sizing.

WATER FIXERS • COMPACT ALL-IN-ONE

SoftFlo C all-in-one cabinet water softener with control valve on top

Under 1,400 sq. ft.

Typical home

1–3 people

Typical household

18,000 grains @ 9 lb

Published capacity

5 GPM / 8 GPM

Nominal / peak flow

Start with the water—not square footage alone. The published “under 1,400 sq. ft.” and “1–3 people” ranges are useful screening guides, but hardness and gallons used determine how quickly capacity is consumed, while simultaneous fixtures determine whether 5 GPM nominal flow is enough. Water testing and a quick demand/installation review are the better way to confirm fit.

All-in-one cabinet

Resin tank and brine storage share one compact cabinet footprint.

Metered automatic regeneration

Down-flow regeneration with a flow-meter totalizer and automatic regeneration.

0.75 cu. ft. 8% crosslink resin

Published resin volume and resin type for the SoftFlo C model.

150 lb salt storage

Large salt-storage capacity for a compact cabinet; actual salt use depends on hardness, use and settings.

The SoftFlo C is part of the Water Fixers SoftFlo/SmartSoft lineup. The details below use the current Water Fixers-published SoftFlo specifications. Final sizing and installation conditions still need to be confirmed at the property.

Feature

Import Manufactured

Feature

Cabinet Model All-in-One

Feature

Mechanical/Electronic Hybrid Control Valve

Feature

Fixed Cycle Programming

Feature

Entry-level position in the Water Fixers lineup

Feature

Typical Size Home Less Than 1400 sq. ft.

Feature

Typical Family Size 1-3 people

Capacity, resin and flow specifications for this model.

Resin Volume

0.75 cu. ft.

Resin Type

8% Crosslink

Resin Capacity

18,000 grains at a 9 lb salt regeneration dose

Nominal Flow Rate

5 GPM

Peak Flow Rate

8 GPM

Maximum Working Pressure

90 PSI

Control-valve and regeneration details from the published SoftFlo specifications.

Control Valve

Mechanical/Electronic Hybrid Control Valve

Programming

Digital Screen, Fixed Cycle, Hardness, Capacity, Salt Lbs., Time of Day, Time of Regeneration

Regeneration

Downflow Regeneration, Flow Meter Totalizer with Automatic Regeneration

Equipment dimensions, connection sizes and salt-storage information for installation planning. Final site clearances should be confirmed in the field.

Salt Cabinet

36” H x 18” D x 10.5” W

Cabinet Salt Tank Capacity

150 lb

Cabinet Brine Well

Safety Overflow Float

Resin Tank

8” D x 35” H

Control Valve Connections

13/16” Inlet and Outlet Ports

Control Valve By-pass Adapters

1/2”, 3/4”, 1”

Warranty terms are reproduced from the published SoftFlo specifications.

Control Valve

1 year — Electronics, piston, seals, spacers, brine piston excluded

Resin Tank

3 years

Salt Cabinet

3 years

FIT BEFORE FEATURES

Is the SoftFlo C enough for your home?

It can be a good fit when the household is small, the hardness load is within its capacity, and simultaneous water demand does not regularly exceed its published flow. Move up in the lineup when demand, hardness load or desired efficiency calls for more capacity or flow.

SoftFlo C is worth considering when

  • Typical household is 1–3 people.
  • Its 5 GPM nominal flow fits expected simultaneous demand.
  • The all-in-one cabinet footprint solves a real space constraint.
  • Measured hardness and daily use fit the 18,000-grain capacity.

Compare a larger model when

  • Several showers or high-flow fixtures often run at once.
  • Household use or hardness consumes capacity quickly.
  • You want higher nominal/peak flow or a higher-capacity resin bed.
  • You want the higher-efficiency regeneration strategy offered by another model.

Test first when the water problem is unclear

Scale and spotting can point toward hardness, but sediment, chlorine-related taste/odor, iron, manganese, acidic water and other conditions need their own treatment path. A softener should not be used as a catch-all solution.

COMPARE THE CURRENT WATER FIXERS LINEUP

SoftFlo C is the smallest-capacity, lowest-flow option in the five-model lineup

That can be an advantage when the demand and installation space match. It becomes a limitation when the household needs more simultaneous flow, more grain capacity, a different tank configuration or a different regeneration strategy.

SoftFlo C all-in-one cabinet water softener with control valve on top

SoftFlo C

Compact all-in-one

Under 1,400 sq. ft. • 1–3 people
18,000 grains @ 9 lb • 5 / 8 GPM

SoftFlo S water softener with separate brine tank

SoftFlo S

Budget two-tank

Under 1,800 sq. ft. • 1–4 people
24,000 grains @ 9 lb • 7 / 10 GPM

SoftFlo SE water softener with separate brine tank

SoftFlo SE

Higher-flow two-tank

Under 2,400 sq. ft. • 1–4 people
36,000 grains @ 9 lb • 10 / 14 GPM

SoftFlo-SEC water softener shown with cover removed and installed

SoftFlo SEC

High-efficiency cabinet

Under 2,500 sq. ft. • 1–4 people
36,000 grains @ 6 lb • 12 / 15 GPM

SmartSoft water softener with separate brine tank

SmartSoft

High-capacity two-tank

Under 3,500 sq. ft. • 1–6 people
48,000 grains @ 6 lb • 14 / 18 GPM

Typical-fit ranges are screening guidance, not a substitute for measured hardness and demand-based sizing. Capacity figures above are shown with their published salt dose so the numbers are not compared out of context.

Installation details that matter after the cabinet fits

The cabinet footprint is only the first fit check. Installation also needs usable access to the bypass and controls, a practical drain route, safe salt-loading clearance, appropriate incoming pressure, and plumbing connections that do not create an avoidable flow restriction.

Published dimensions: 36 in. H × 18 in. D × 10.5 in. W cabinet; 8 in. D × 35 in. H resin tank inside the cabinet.

Salt Cabinet

36 in. H × 18 in. D × 10.5 in. W

Cabinet Salt Tank Capacity

150 lb

Cabinet Brine Well

Safety Overflow Float

Resin Tank

8 in. D × 35 in. H

Control Valve Connections

13/16 in. Inlet and Outlet Ports

Control Valve By-pass Adapters

1/2 in., 3/4 in. and 1 in.

SoftFlo C all-in-one cabinet water softener with control valve on top

SoftFlo C published warranty terms

Read the written warranty at purchase. Component coverage is not the same thing as labor coverage, and exclusions matter. Keep the final warranty document with the model information so future service decisions are based on the terms that applied when the system was purchased.

Control Valve
1 year
Electronics, piston, seals, spacers, brine piston excluded

Resin Tank
3 years

Salt Cabinet
3 years

SoftFlo C Water Softener FAQs

Direct answers about sizing, flow, regeneration, what this model treats, installation and when to compare a larger SoftFlo or SmartSoft system.

Water Fixers lists SoftFlo C for a typical home under 1,400 sq. ft. and a household of 1–3 people. Those ranges are screening guidance. Final sizing should also use measured hardness, actual daily water use, simultaneous flow demand, plumbing conditions and installation space.
Published capacity is 18,000 grains at a 9 lb salt regeneration dose. Published flow is 5 GPM nominal and 8 GPM peak. The maximum working pressure is 90 PSI.
SoftFlo C is an all-in-one cabinet model with 18,000 grains at 9 lb salt and 5/8 GPM nominal/peak flow. SoftFlo S is a two-tank model with 24,000 grains at 9 lb salt and 7/10 GPM nominal/peak flow. The better fit depends on hardness load, household demand, available space and preferred equipment layout.
SoftFlo C uses down-flow regeneration with a flow-meter totalizer and automatic regeneration. Its digital control includes hardness, capacity, salt pounds, time-of-day and regeneration-time settings.
Published cabinet salt storage is 150 lb. Actual salt use depends on hardness, water use, programmed settings and regeneration frequency.
No water softener should be treated as a universal filtration system. SoftFlo C is selected primarily for hardness treatment. If the concern is chlorine-related taste or odor, sediment, iron, manganese, acidic water or another well-water condition, test the water and choose the appropriate treatment path.
The published cabinet size is 36 in. high × 18 in. deep × 10.5 in. wide. The property also needs practical clearance for the valve and bypass, salt loading, drain routing and plumbing service access.
Current published terms are 1 year on the control valve, with electronics, piston, seals, spacers and brine piston excluded; 3 years on the resin tank; and 3 years on the salt cabinet. Confirm the written warranty, exclusions and any labor terms at purchase.
Compare a larger model when measured hardness and daily use consume capacity too quickly, simultaneous fixture demand makes 5 GPM nominal flow too restrictive, or you want a different tank configuration, higher capacity or a different regeneration strategy.

Need help deciding whether SoftFlo C fits?

Water Fixers can test hardness, review household and fixture demand, confirm installation space and compare SoftFlo C with the other four models before you choose equipment.

CALL NOW! Se Habla Español!