TWO-TANK WATER SOFTENER
SoftFlo-S Specifications & Features
A USA-manufactured two-tank model with electronic control and fixed-cycle programming.
HOME SIZE
< 1,800 sq. ft.
HOUSEHOLD
1–4 people
CAPACITY
24,000 grains
FLOW
7 GPM
✓ Two-tank design
✓ 24,000-grain capacity
✓ 7 GPM nominal flow
✓ Water Saving Factors
Sizing note: Square-footage and family-size figures are typical guidance from the supplied specification sheet. Water hardness, daily water use, simultaneous flow demand and plumbing conditions should also be considered when selecting a softener.
Who this model is sized for
The home-size and household figures below are the typical guidance listed on the supplied specification sheet. Final sizing should also consider water hardness and actual household demand.
Typical home size
Less than 1,800 sq. ft.
Typical family size
1–4 people
System design
Two-Tank System
Manufacturing
USA Manufactured
Positioning
Budget Pricing
Capacity & flow performance
These are the treatment-media, capacity and flow figures listed for this model.
Resin volume
1.0 cu. ft.
Resin type
8% Crosslink
Resin capacity
24,000 grains @ 9 lbs. Salt Regenerate
Nominal flow rate
7 gpm
Peak flow rate
10 gpm
Maximum working pressure
90 psi
Controls & regeneration
This tab keeps the control-valve and regeneration terminology from the supplied specification sheet.
Control valve
Electronic Control Valve
Programming
Digital Screen, Fixed Cycle, Hardness, Capacity, Salt Lbs., Time of Day, Time of Regeneration, Water Saving Factors
Regeneration
Downflow Regeneration, Flow Meter Totalizer with Automatic Regeneration
Programming type
Fixed Cycle Programming
Dimensions & connections
Use these dimensions and connection sizes as equipment-planning information. Site clearance and plumbing layout still need to be verified at installation.
Salt cabinet
30” H x 14” D
Salt tank capacity
200 lbs.
Brine well
Safety Overflow Float
Resin tank
9” D x 48” H
Valve connections
1” Inlet and Outlet Ports
By-pass adapters
3/4”, 1”
Warranty information
Warranty terms below are reproduced from the supplied specification sheet.
Control valve
1 year — electronics, piston, seals, spacers, brine piston excluded
Resin tank
3 years
Salt tank
3 years
SoftFlo S Water Softener
SoftFlo S is a Water Fixers softener option for Central Coast homes that need straightforward soft water treatment from a compact two-tank system.
For Santa Maria homeowners dealing with hard water, scale buildup, spotting, or softener replacement questions, SoftFlo S is worth comparing when a simple, dependable setup matters most.
A straightforward softener for hard water problems
Hard water can leave mineral buildup on fixtures, spots on dishes, dry-feeling skin, and extra wear on plumbing and appliances. A properly matched water softener can help reduce those everyday hard water issues.
What comes with the SoftFlo S system
SoftFlo S is a two-tank water softener. The mineral tank holds the softening resin and carries the control valve, and a separate brine tank stores the salt used for regeneration. SoftFlo S and SoftFlo SE share the same brine tank, so Water Fixers can service either system from common parts.
Pictured: the brine tank supplied with the SoftFlo S and SoftFlo SE systems.
Best for
Homes that want dependable soft water treatment from a compact, uncomplicated two-tank softener.
Helps with
Scale buildup, spots on fixtures, hard water feel, and softener replacement decisions for Santa Maria and Central Coast homes.
Next step
Compare SoftFlo S against SoftFlo SE, SoftFlo SEC, SoftFlo C and SmartSoft, or contact Water Fixers for help choosing.
Compare before choosing
SoftFlo S is one option in the Water Fixers softener lineup. The right choice depends on water hardness, home size, usage, plumbing setup, available space, and whether water testing or filtration should also be considered.
Related softener pages
Ask Water Fixers about SoftFlo S
Call Water Fixers for SoftFlo S water softener guidance in Santa Maria and nearby Central Coast communities.